PRODUCTS - Fall Protection & Safety - LANYARDS / SHOCK PACKS

ABSORBICA Y Tie Back Double lanyard with integrated intermediate tie-back rings and compact energy absorber. Designed for continuous protection on very large structures and when passing intermediate anchor points. The TIE-BACK system allows the lanyard ends to be reconnected to fit around structures with a very large cross section. The arms are elasticated to avoid hindering progression. Equipped with a captive carabiner and two MGO large-opening connectors, it is certified to U.S., European and Russian standards. TIE-BACK intermediate tie-back rings on thelanyard allow connection to very large structures. View Specifications and Technical Information

ABSORBICA Y Double lanyard with integrated compact energy absorber, for continuous protection when passing intermediate anchors. It is available in 80 or 150 cm versions (without connectors). The 150 cm version has elasticated arms, to avoid hindering progression. Equipped with a captive carabiner and two MGO large-opening connectors, it is certified to U.S. and European standards. Selling Points Designed for continuous protection when passing intermediate anchor point Absorbs energy in case of a fall - tearing of the energy absorber webbing limits the impact force on the use - works with users who weigh between 50 and 130 k - progressive tearing reduces the deceleration on lightweight user Minimal bulk - compact energy absorber facilitates handlin - the 150 cm version has elastic arms, to avoid hindering progression Abrasion resistance - durable zippered fabric pouch protects the energy absorber from abrasion or contaminants while allowing for regula inspection of the absorber - lanyard and pouch reduce the risk of cuts and potential severing over edge Comes with a captive steel carabiner with TRIACT-LOCK auto-locking system for attachment to the harness, and two MG - large-opening connectors for connection to a metal structure Available in two lengths: 115 and185 c The ABSORBICA-Y lanyards with two arms allow for continuous protection when passing an intermediate anchor, by successively detaching and re-attaching the two arms. In case of a fall, the tearing of the energy absorber webbing limits the impact force on the user. The lanyards are designed for users who weigh between 50 and 130 kg. The progressive tearing of the webbing reduces the deceleration on lightweight users. The energy absorber is very compact to avoid hindering the user's movements, or interfering with handling. A durable fabric pouch helps protect the energy absorber from abrasion and potential contaminants. View Specifications and Technical Information

GRILLON Quick Adjustment Anchor The GRILLON adjustable anchors are useful for setting a fixed anchor point in many situations. The length of the rope required for the anchor is very easy to adjust for the specific terrain using the integrated pivoting cam. Selling points The self-locking device allows easy adjustment of length and tension at the anchor point Semi-static rope, resistant to aging and abrasion Sewn terminations with plastic sheath on both ends help keep the connector in position and help protect the rope from abrasion Tie a mule knot behind the GRILLON to lock the anchor Available in four lengths (without connector): GRILLON (L52A 002) : 2m, 435g GRILLON (L52A 003) : 3m, 515g GRILLON (L52A 004) : 4m, 595g GRILLON (L52A 005) : 5m, 675g View Specifications and Technical Information

GRILLON MGO GRILLON MGO lanyards are equipped with an MGO connector with a very large gate opening for connection to metal structures or to large-diameter cables and bars. The GRILLON MGO lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. GRILLON MGO is available in two lengths: 2 and 3 m. Selling points Easy to use: the fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station Used in single mode on the harness ventral attachment point when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle, while holding the free end of the lanyard Ends equipped with a plastic sheath that holds the connector in place and protect the rope from abrasion Comes with an MGO connector with very large gate opening for connection to metal structures Available in two lengths: 2 and 3 m. Lanyard length is immediately identified by a color-coded label at the connector end Replacement ropes available View Specifications and Technical Information

JANE Non-adjustable dynamic rope lanyard Can be combined with an ABSORBICA energyabsorber to set up an energy-absorbing «I» or «Y» lanyard of less than two meters in length Sewn ends protected by plastic sheath to hold the connector in place and protect the terminations from abrasion Available without connector or with large-opening MGO connector for attachment to metal structures, cables and large diameter bars (large-opening, auto-locking connector permanently sewn into the lanyard termination) Lanyards without connector: JANE 0.6 m (L50 60): 110 g JANE 1 m (L50 100): 130 g JANE 1.5 m (L50,150): 185 g JANE 2 m (L50 200): 225 g View Specifications and Technical Information

ABSORBICA Tear webbing energy absorber Used in combination with a JANE lanyard to set up an energy-absorbing lanyard with a maximum length of two meters Ends equipped with STRING to hold the connector inposition and protect the webbing from abrasion Compact and lightweight View Specifications and Technical Information

ASAP'SORBER Allows the rope to be kept at a distance to protect it during certain work phases. The ASAP’SORBER lanyard connects to the ASAP or ASAP LOCK mobile fall arrester to allow the user to work at a distance from the rope in order to protect it during certain work phases. It is equipped with an energy absorber located in a zippered fabric pouch to protect it from abrasion while allowing for regular inspection. This lanyard is available in two lengths for choice of the best balance between distance from the rope and reducing the fall length. Selling Points Attaches the ASAP or ASAP LOCK mobile fall arrester to the harness Allows the user to distance himself from the rope in order to: - clear the work area - protect the rope from sharp tools and molten metal splash Absorbs energy in case of a fall by tearing specific stitching Available in two lengths for choice of the best balance between distance from the rope and reducing the fall length Zippered fabric pouch protects the energy absorber from abrasion and other damage while allowing for regular inspection of the absorber. Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion Product specifications Material(s): nylon, polyester View Specifications and Technical Information

NL01PW01-4S Web Lanyard with integrated Clear Pack Energy Absorber Available with 2" rebar hook NL01PW314-4S Available in 4ft and 6ft length 9,800 lbs. MBS polyester webbing 3/4" double locking snap hooks 4' total length

NL01PW01-6SA Adjustable Web Lanyard - Single Leg Alternate hooks available 9,800 lbs. MBS polyester webbing 3/4" double locking snap hooks Adjustable up to 6'

NOR-01-01-6 & NOR-01-01-6Y Single & Double Leg Noryard All NORYARD lanyards are certified to CSA Z259.11-05 Meets ANSI Z359.1 requirements Tubular webbing sheath Internal core energy absorber SNAP HOOK OPTIONS Forged Aluminum snap hook Double locking snap hook Swivel non-indicating snap hook Double locking rebar hook Double locking rebar snap hook

NL01NR01-6 Nylon Rope Lanyard Constructed of 3 strand 5/8" diameter nylon rope 3/4" double locking snap hooks Available in various lengths Available with alternate connecting components

NL01GC01-4 PVC Coated Cable Lanyard 1/4" diameter, 7 x 19 galvanized 3/4" double locking snap hooks PVC coated to 5/16" 4' total length

NL01GC01-4S PVC Coated Cable Lanyard with Integrated Energy Absorber 1/4" diameter, 7 x 19 galvanized 3/4" double locking snap hooks PVC coated to 5/16" 4' total length

NL01GC01-4YS Double Leg PVC Coated Cable Lanyard with Integrated Energy Absorber 1/4" diameter, 7 x 19 galvanized 3/4" double locking snap hooks PVC coated to 5/16" 4' total length